Water quality in Thane
Where 456 mg/L sits
Your area reads Acceptable. BIS rates water up to 500 mg/L as acceptable and 150–300 mg/L as ideal for taste and health.
What an RO purifier changes
Thane tap today
~456mg/L
After RO purification
~23–50mg/L
An RO membrane typically removes 90–95% of dissolved solids, bringing water into the ideal drinking band. Boon purifiers remineralise after RO so the water isn’t stripped flat.
What this means for you in Thane
Taste
Generally clean and light to drink.
Health
Within safe limits, though local supply can vary by season and building.
Appliances
Low scaling risk on taps and appliances.
What to use
A UV/UF purifier is usually enough; RO with mineral balance still helps.
Other parameters that matter
| Parameter | BIS limit | Why it matters |
|---|---|---|
| Bacteriological (E. coli / coliform) | Nil in any 100 ml | Causes stomach infections; needs UV or boiling. |
| Fluoride | 1.0 mg/L (max 1.5) | Excess causes dental & skeletal fluorosis. |
| Arsenic | 0.01 mg/L | Toxic; long-term exposure is carcinogenic. |
| Nitrate | 45 mg/L | Risky for infants (blue-baby syndrome). |
| Iron | 0.3 mg/L | Metallic taste, staining of fixtures & clothes. |
| Total hardness | 200 mg/L (max 600) | Scaling on taps, geysers & appliances. |
Regional watch
Government groundwater surveys have flagged elevated nitrate in parts of Maharashtra. If you draw borewell water, get these tested specifically.
Microbiological note
Bacterial safety (E. coli/coliform) is not part of chemical groundwater monitoring, so it needs a lab test of your own tap, and varies with pipe leaks and monsoon. UV purification (built into Boon purifiers) inactivates bacteria and viruses; RO removes the dissolved contaminants above.
Why is TDS like this in Thane?
Most Indian cities draw heavily on groundwater, which dissolves minerals and salts from the soil and rock it sits in. Over-extraction, ageing pipes and local geology push dissolved solids (TDS), hardness and sometimes fluoride, nitrate or arsenic above safe limits. City taps often blend treated municipal supply with borewell water, so two buildings on the same street can read very differently — and levels shift with the seasons, usually peaking just before the monsoon. The figure above is an indicative area reading from government monitoring, so your own tap can differ; testing it twice a year is a good habit.
Read our full guide to TDS & how to reduce it ›How Thane compares
Among the cities we map, Thane has the 21st lowest average groundwater TDS — within the BIS acceptable limit of 500 mg/L, against a median of 616 mg/L across those cities.
Individual monitoring points around Thane range from 212 to 1091 mg/L. An average hides that spread, so your own borewell or municipal line can read well above or below 456 mg/L — one more reason to test your actual supply.
Elsewhere in Maharashtra, Aurangabad averages ~1235 mg/L, Solapur ~1086 mg/L, Nashik ~800 mg/L and Mumbai ~719 mg/L.
06 · Best fit for Thane
Boon Tap
from ₹18,500
Water here is hard (~277 mg/L), so an RO purifier like Boon Tap removes the excess minerals.
Thane water — questions
What is the TDS of water in Thane?
Groundwater near Thane has an average TDS of about 456 mg/L, within the BIS acceptable limit of 500 mg/L, based on government monitoring data (CGWB station monitoring via India-WRIS National Water Data Portal (EC-derived TDS, 25 km radius), 2016–2023). Levels range roughly 212 to 1091 mg/L across nearby monitoring points.
Is tap water safe to drink in Thane?
TDS around 456 mg/L is within BIS limits, but municipal and borewell supply varies by building and season, so test your own water and use a purifier with monitoring to be sure.
Do I need an RO water purifier in Thane?
Yes. High TDS or hardness in Thane means reverse osmosis (RO) is the appropriate technology to bring water within safe, palatable limits.
Reports for other cities
Data sources
- CGWB station monitoring via India-WRIS National Water Data Portal (EC-derived TDS, 25 km radius)
- CGWB National Groundwater Quality 2018-2021 (EC-derived TDS)
- CGWB Annual Ground Water Quality Report 2024 (2023 monitoring)
- CGWB district groundwater brochures & state reports (2013-2024)
- CGWB Ground Water Quality (Manual - Chemical Parameters) via India-WRIS National Water Data Portal (station-level, 2015-2023)
- Pincode and locality coordinates: GeoNames postal codes, CC BY 4.0
Primary datasets: Central Ground Water Board (CGWB) and India-WRIS, Government of India; limits per BIS IS 10500.
Disclaimer: Figures are indicative area estimates from government groundwater monitoring nearest to this location and may differ from your exact tap or municipal supply. They are not a substitute for a lab test of your own water. This page is general information, not medical advice, and any product suggestion is general guidance based on typical area readings, not a diagnosis of your supply. For health concerns, consult a qualified professional.